Features of IP-Com W36AP Access Point In Bangladesh
W36AP AC1200 Dual Band Gigabit In-Wall Access Point
AC1200 Dual Band Gigabit In-Wall Access Point (AP) is an IP-COM high-performance wireless access point designed for hotel rooms, villas, large apartments, KTV compartments and other places. Compliant with IEEE 802.11ac protocol and Wave 2 standard, and featured with the MU-MIMO technology, APs of this series support a dual-band concurrent wireless speed of up to 1167 Mbps. Adoption of the standard 86 mm x 86 mm in-wall design enables that the AP can be installed in any in-wall electrical boxes of 86 mm x 86 mm and 75 mm x 75 mm. Elegant and exquisite appearance goes well with the interior decoration design of the room. With the assistance of the existing in-wall electrical box structure, the AP helps you deploy your wireless networks easily, freeing you from time-consuming networking, and effectively addressing the weak WiFi signal problem in guest rooms.
Colorful panel pastes, a perfect match for the installation environment
Multicolor panel decals make the AP go well with the installation environment.
Standard 86 mm x 86 mm design for easy installation
The standard 86 mm x 86 mm design and elegant appearance make the AP go well with various interior decoration.
Compliant with IEEE 802.11ac and WAVE2.0
Featured with the MU‑MIMO technology, a single AP can communicate with multiple wireless terminals at the same time, significantly improving the throughput of multi-user concurrency and enhancing user experience.
2.4 GHz and 5 GHz concurrency for a higher capacity
With both pure 5 GHz band with less interference and 2.4 GHz band with stronger compatibility and longer transmission distance, the AP allows 2.4 GHz and 5 GHz wireless terminals to access at the same time, ensuring more wireless clients to access. The single AP has more than three times capacity of the traditional single band AP.
Spectrum navigation (5 GHz priority), an escort for network performance
The AP intelligently enables the wireless clients to connect to 5 GHz wireless network in priority, ensuring load balancing at dual bands and improving the wireless performance.
Precise RF signal optimization, a guarantee of 2-room WiFi coverage without dead zone
With the independent RF chip, the AP separates the power supply part and WiFi signal processing part, completely avoiding the interference of the power magnetic field on the WiFi signal. Boosted by the high-performance antenna, the AP can cover two side-by-side hotel rooms with full WiFi.
Standard PoE power supply, an assurance of easy AP upgrade and installation
The AP can be powered by the PoE devices. With an Ethernet cable, the AP can be powered and transmit data at the same time. The maximum power supply distance of up to 100 meters enables the AP to be installed easily in hotels or your houses without breaking the existing power line layout.
Supporting unified configuration and management
The AP supports the unified management and configuration of IP-COM ACs and enterprise routers, enabling the network administrators to manage, configure and monitor all APs conveniently.
What is the price of IP-Com W36AP Access Point In Bangladesh?
The price of IP-Com W36AP Access Point starts from 4,050 .
The price may vary due to your customization and product availability.
You can buy IP-Com W36AP Access Point from our website or visit our showrooms nearby.